Pay in 4 interest-free payments of $6.13 Learn more
Ships within 48 hours · Estimated delivery Jul 28 - Aug 2
The proof test pressure shall be 600 PSI / 4137 kPa and the burst test pressure of a 3 foot / 1 meter sample shall be at least 900 PSI / 6205 kPa
The standard locking cap secures the opening of the FDC inlet but leaves the brass swivel connection exposed
Constructed from hardened thermoplastic
Global type "F" stainless steel 3/4 inch male camlock (Cam & Groove) coupler to 3/4 inch male NPT threads
Unit consists of the top mounted drying rack
4" Steel Hose Mender Male Size_GHT The proof test pressure shallThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or